IEC 61084-2-1-2017 電氣裝置用電纜槽和管道系統--第2-1部分:特殊要求--安裝在墻上或天花板上的電纜槽和管道系統 Cable trunking systems and cable ducting systems for electrical installations – Part 2-1: Particular requirements – Cable trunking systems and cable ducting systems intended fo
- 標準類別:
- 標準大?。?/li>
- 標準編號:IEC 61084-2-1-2017
- 標準狀態:現行
- 更新時間:2023-09-04
- 下載次數:次
This part of the IEC 61084 series specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC. These systems are intended for mounting on walls and/or ceilings. They can be embedded, installed in a flush or semi-flush state, surface mounted or mounted away from the surface using fixing devices. This document does not apply to conduit systems, cable tray systems, cable ladder systems, power track systems or equipment covered by other standards.dition 2.0 2017-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Cable trunking systems and cable ducting systems for electrical installations – Part 2-1: Particular requirements – Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings Systèmes de goulottes et systèmes de conduits-profilés pour installations électriques – Partie 2-1: Exigences particulières – Systèmes de goulottes et systèmes de conduits-profilés prévus pour être montés sur le
-
GB/T 1094.1-2013電力變壓器 第1部分:總則 2023-09-04
-
GB/T 706-2016熱軋型鋼 2023-09-04
-
JB/T 10216-2013電控配電用電纜橋架 2023-09-04
-
GB/T 10801.2-2018絕熱用擠塑聚苯乙烯泡沫塑料(XPS) 2023-09-04
