首頁 > 標準下載>ASTM D6426-2018 中間餾份燃料油過濾性測定方法 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils免費下載

ASTM D6426-2018 中間餾份燃料油過濾性測定方法 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

標準類別：
標準大小：
標準編號：ASTM D6426-2018
標準狀態：現行
更新時間：2023-08-13
下載次數：次

會員下載(8點)

VIP會員下載(0點)

游客掃碼下載(9點)

標準簡介

1.1 This test method covers a procedure for determining the filterability of distillate fuel oils within the viscosity range from 1.70 mm²/s to 6.20 mm²/s (cSt) at 40 °C.

Note 1: ASTM specification fuels falling within the scope of this test method are Specification D396 Grade No. 2, Specification D975 Grade No. 2-D, and Specification D2880 Grade No. 2-GT.

Note 2: The test method has been used with lower viscosity middle distillate fuels such as Specification D396 Grade No. 1, Specification D975 Grade No. 1-D, and Specification D2880 Grade No. 1-GT, but the precision has not been studied and therefore the stated precision has not been validated for these grades.

1.2 This test method is not applicable to fuels that contain undissolved water.

1.3 The values stated in SI units are to be regarded as standard.

1.3.1 Non-SI units, specifically U.S. customary units such as temperature in degrees Fahrenheit and pressure in pounds per square inch gauge (psig), are included for inform

標準截圖

上一條：GB/T 34123-2017 電力系統變頻器保護技術規范 Technical specification for power system inverter protection

下一條：返回列表

版權：如無特殊注明，文章轉載自網絡，侵權請聯系cnmhg168#163.com刪除！文件均為網友上傳，僅供研究和學習使用，務必24小時內刪除。