首頁 > 標準下載>ASTM G151-2019 使用實驗室光源的加速試驗裝置中非金屬材料暴露規程 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources免費下載

ASTM G151-2019 使用實驗室光源的加速試驗裝置中非金屬材料暴露規程 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

標準類別：
標準大?。?/li>
標準編號：ASTM G151-2019
標準狀態：現行
更新時間：2023-06-05
下載次數：次

會員下載(8點)

VIP會員下載(0點)

游客掃碼下載(9點)

標準簡介

1.1 This practice covers general procedures to be used when exposing nonmetallic materials in accelerated test devices that use laboratory light sources. Detailed information regarding procedures to be used for specific devices are found in standards describing the particular device being used. For example, detailed information covering exposures in devices that use open flame carbon arc, enclosed carbon arc, xenon arc, and fluorescent UV light source are found in Practices G152, G153, G154, and G155 respectively.

Note 1: Carbon-arc, xenon arc, and fluorescent UV exposures were also described in Practices G23, G26, and G53 which referred to very specific equipment designs. Practices G152, G153, and G154, and G155 are performance based standards that replace Practices G23, G26, and G53.

1.2 This practice also describes general performance requirements for devices used for exposing nonmetallic materials to laboratory light sources. This information is intended primarily for producers of laboratory accelerated exposure devices.

標準截圖

上一條：GB/T 39301-2020 電鍍污泥減量化處置方法 Disposal method for electroplating sludge reduction

下一條：返回列表

版權：如無特殊注明，文章轉載自網絡，侵權請聯系cnmhg168#163.com刪除！文件均為網友上傳，僅供研究和學習使用，務必24小時內刪除。