ASTM D3801-2019處于垂直位置的固體塑料比較燃燒性能測量方法Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

標準類別：
標準大?。?/li>
標準編號：ASTM D3801-2019
標準狀態：現行
更新時間：2023-04-19
下載次數：次

標準簡介

1.1 This fire-test-response standard covers a small-scale laboratory procedure for determining comparative burning characteristics of solid-plastic material, using a 20-mm (50W) premixed flame applied to the base of specimens held in a vertical position.

Note 1: This test method and the 20 mm (50W) Vertical Burning Test (V-0, V-1, or V-2) of ANSI/UL 94 are equivalent.

Note 2: This test method and Test Method B of IEC 60695–11–10 are equivalent. IEC 60695–11–10 has replaced ISO 1210.

Note 3: For additional information on materials that burn up to the holding clamp by this test method, see Test Method D635. For test methods of flexible plastics in the form of thin sheets and film, see Test Method D4804. For additional information on comparative burning characteristics and resistance to burn-through, see Test Method D5048.

1.2 This test method was developed for polymeric materials used for parts in devices and appliances. The results are intended to serve as a preliminary indication of their acceptability with respect to flammability for a particular application. The final acceptance of the material is dependent upon its use in

標準截圖

上一條：GB/T 39881-2021疑似毒品中安眠酮檢驗氣相色譜和氣相色譜-質譜法Examination methods for methaqualone in suspected drugs- Gas chromatography and gas chromatography-mass spectrometry

下一條：AATCC 143-2018Appearance of Apparel and Other Textile End Products after Home Laundering

版權：如無特殊注明，文章轉載自網絡，侵權請聯系cnmhg168#163.com刪除！文件均為網友上傳，僅供研究和學習使用，務必24小時內刪除。